Cubinote

            Quick Start Guide

            STEP 1: Download CUBINOTE App & Create a New Account

            Scan the QR code below to download the app



            Or download it here


             

            Then, create a new CUBINOTE account or sign in to your CUBINOTE account.

              



            STEP 2: Power on CUBINOTE

            Power on your CUBINOTE device, then the green light on button will be on.

             


            STEP 3: Bind CUBINOTE device to your account

            Open CUBINOTE App, tap the icon on the top right corner, then tap Add Devices
              

             

            Press CUBINOTE button 2 times to print out a QR code, then scan the QR code with your phone. Try to move your phone closer or further to complete the scanning.




            If your phone doesn't show a QR scanner, go back to the Homepage and tap QR Scan.

            *Please be aware that one CUBINOTE device can only be bound to one CUBINOTE account


             

            STEP 4: Connect CUBINOTE to the Wi-Fi network

            Please be aware that CUBINOTE does not support 5Ghz Wi-Fi. Therefore, please switch your phone to 2.4Ghz Wi-Fi

            For iPhone

            Make sure your phone's Wi-Fi and Bluetooth are enabled and connected to the Wi-Fi network.


            Press and hold CUBINOTE button for 6 seconds or more until a text "Wi-Fi Smart Configuration" is printed out


            When it is printed out, it indicates that you've successfully entered Wi-Fi smart configuration mode



            Enter the Wi-Fi network password, then tap Next


             

            Your CUBINOTE App will display the CUBINOTE device(s) within the Bluetooth range. Select your CUBINOTE device from the list.

            Once the process complete, a text "Wi-Fi Connected" will be printed out. Then tap Yes




            For Android Phone

            Make sure your phone’s Wi-Fi is enabled and connected to the Wi-Fi network.

            Press and hold CUBINOTE button for 6 seconds or more until a text "Wi-Fi Smart Configuration" is printed out.


            When it is printed out, it indicates that you've successfully entered Wi-Fi smart configuration mode.
             


            Enter the Wi-Fi network password, then tap Next

              


              

            Once the process complete, a text "Wi-Fi Connected" will be printed out. Then tap Yes

              



            LOCAL MODE

            Connect to CUBINOTE's Bluetooth

            Go to your phone's Bluetooth Setting, then search and pair with Cubinote's Bluetooth

              

             

            To make sure that you have completed both the Wi-Fi and Bluetooth printing setup, when you print the note you can choose which printing mode you want to use. The Bluetooth printing mode will have a Bluetooth icon on the right side as shown below.       

             

            Once you completed all the setup both printing modes are always on at the same time. You can print through Wi-Fi and Bluetooth connection simultaneously.


            Updated: 14 Feb 2019 04:18 PM
            Helpful?  
            Help us to make this article better
            0 0