Wi-Fi configuration stops and failed at Step 2: Connect to Cubinote

Wi-Fi configuration stops and fails at Step 2: Connect to Cubinote

This issue happens on some Android devices with high OS version(Android 8.0 or higher). To complete the setup, please follow the instruction below.

Step 1: Manually connect to Cubinote's Wi-Fi

After you pass Step 1 and it's connecting to Cubinote in Step 2, without exiting from Cubinote app, please go to your Wi-Fi setting and manually connect to a Wi-Fi named “Cubinote-xxxx”

If it's already connected to "Cubinote-xxxx" try to connect to another Wi-Fi network and then connect back to "Cubinote-xxxx"

If there's a notification similar to this "Are you sure to connect this Wi-Fi? This is not connecting to the internet," please continue to connect to "Cubinote-xxxx" This is a normal system response when you're connecting to a Wi-Fi that is not connected to the internet such as "Cubinote-xxxx"

Step 2: Switch back to Cubinote app

Switch back to Cubinote app, and then the setup process will continue. Please wait until all the steps are completed

Step 3: Manually connect to your Wi-Fi network

After the setup completed, go to your phone's Wi-Fi setting and connect to your Wi-Fi network again

    • Related Articles

    • Wi-Fi configuration stops and fails at Step 3: Sending setup info to Cubinote

      This issue happens on some Android devices with a high OS version(Android 8.0 or higher). To complete the setup, please follow the instruction below. Turn off your phone's internet data and connect to your Wi-Fi network. If the process stops at step ...
    • How to connect Cubinote Pro to Wi-Fi network?

      Please be aware that Cubinote does not support 5Ghz Wi-Fi and Wi-Fi network that requires account login. Your Wi-Fi name and password must not contain any special characters. Therefore, please enable your 2.4Ghz Wi-Fi and then connect your phone to ...
    • How to connect Cubinote Home to Wi-Fi network?

      Please be aware that Cubinote does not support 5Ghz Wi-Fi and Wi-Fi network that requires account login. Your Wi-Fi name and password must not contain any special characters. Therefore, please enable your 2.4Ghz Wi-Fi and then connect your phone to ...
    • Unboxing Cubinote Home

      WHAT YOU'LL GET 1 Cubinote Home Device 1 Power Adaptor 1 Roll of Thermal Paper (inside the device) 1 Quick Installation Guide 1 User Manual & Warranty Sheet 1 pack of Tri-color Paper Rolls DEVICE INTRODUCTION HOW TO USE CUBINOTE BUTTON To bind/add a ...
    • Cubinote Pro doesn't print the Important Note

      Make sure that your phone has a good internet connection Unbind/release your Cubinote, and then bind your Cubinote again If your Cubinote's light is blinking, re-configure the Wi-Fi again If you see that the light change to solid green, that should ...