Cubinote Pro Specifications
120(L) x 120(W) x 80(H)mm
iOS 10 or later; Android 5.0 or later
Input: 100-240V, 50/60Hz
Output: 12V, 4A
Direct thermal printing. Black and white (no color)
Cloud Mode (Wi-Fi)
Bluetooth Mode (Bluetooth)
3 1/8 inch (80mm)
Up to 70mm/second
Type of Paper
Thermal paper; width 3 1/8 inch (80mm)
Cubinote Home Specifications
Size 114(L) x 89(W) x 64(H) mm Weight 151g (Not include paper roll inside the device) Compatibility iOS 10 or later; Android 5.0 or later Connectivity Wi-Fi 2.4Ghz Printing Method Direct thermal printing. Black and white (no color) Printing Mode ...
Unboxing Cubinote Pro
WHAT YOU'LL GET 1 Cubinote Pro Device 1 Power Adaptor 1 AC Power Cord 1 Roll of Thermal Paper (inside the device) 1 Quick Installation Guide 1 User Manual & Warranty Sheet DEVICE INTRODUCTION
Is Cubinote Pro compatible with my phone?
Cubinote Pro is compatible with iOS 10 & later, Android 5.0 & later. When connecting your Wi-Fi network with Cubinote in Cloud Mode Setup, please be aware that Cubinote does not support 5Ghz Wi-Fi, Cubinote only supports 2.4Ghz Wi-Fi. How to enable ...
Cubinote Factory Reset
Cubinote Factory Reset will change all the Cubinote devices' setting back to default. If you want to reset the connection of your Cubinote, please follow this guide If you need to reset your Cubinote for troubleshooting an issue, please follow this ...
Cubinote Pro doesn't print the Important Note
Make sure that your phone has a good internet connection Unbind/release your Cubinote, and then bind your Cubinote again If your Cubinote's light is blinking, re-configure the Wi-Fi again If you see that the light change to solid green, that should ...